Vent Tech 16'HOOD EXHAUST-H - 16 Foot Commercial Exhaust Hood System


(Heated Make Up Air - Fire Suppression and Duct - 10' System-Heated)

Not quite what you were looking for? Browse more Commercial Kitchen Hood Systems
Commercial Exhaust Hood System
Commercial Exhaust Hood System Supply Fan Exhaust Fan Depiction of Air Flow
List Price: $25,154.00 You Pay: $15,092.00 Each You Save: $10,062.00 (40%) ****FREE SHIPPING**** (To Commercial Address) Usually Ships Within: 10 Days (Business Days)
Add to Favorites
Manufacturer: VENT TECH
Zesco Item No.: 351-D-007
Mfg. Item No.: 16'HOOD EXHAUST-H
Be the first to review this item!
Bookmark and Share
16 Foot Commercial Exhaust Hood System with Heated Make Up Air - Fire Suppression and Duct - 16'System-Heated
Exhaust Hood System includes: Exhaust Hood to be 192" Long x 48" Deep x 24" Tall Hood, Make Up Air Plenum to be 192" Long x 14" deep x 10" Tall, Gas Fired (heated) Make Up Air Unit, Two (2) Flat Roof Curbs, Liquid-Tight Welded Steel Exhaust Duct (10' Straight Max), Pre-Wired Electrical Panel, and Ansul Fire Suppression System. Based on Make Up Air Volume of 80% of Hood Exhaust

Note: All Systems are based on a single story building with a flat roof, steel truss construction and with a straight duct run of 10’ max. Duct work does not include zero clearance duct wrap if required. This price includes components and not installation. The purpose of this pricing is to give one a very good idea for costs on a total system and should be viewed as a very good estimate for components. All situations are different due to building conditions and the choices of cooking equipment underneath the hood. As for total system installation a representative must make arrangements to review the space of the building and local fire codes will prevail.

16'-0"  Hood with ASP (Air Supply Plenum):
Performance Enhancing Lip for up to 31% lower exhaust rates.
Sloped grease trough with enclosed grease cup per NFPA 96 requirements
Embossed 430 stainless steel where exposed
UL 710 Listed without Exhaust Fire Damper
Standard Baffle Filters
Factory Mounted 3" back airspace
4000 CFM (cubic feet per minute) - exhaust with two (2) Factory Mounted Exhaust Collar
Five (5} Globe light fixtures (bulbs not included)
Air Supply Plenum  on Front  - 3200 cfm supply

Exhaust Fan EF-1:
Belt Drive Upblast Centrifugal Roof Exhaust Fan Model XRUB-180-15
Volume of 4,000 cfm at 1.0 in wc - Fan Speed: 1,053 rpm - 1-1/2 hp - 208-230 3ph
Shut-Off-Switch - Nema-3R Toggle, Junction Box Mounted and Wired to exhaust fan
Curb - Flat Roof Application - GPI-30-G20
Heat Baffle
Clean Out Port
Grease Trap with Drain Connection
Mounted Hinged Base
Lifting Lugs
UL/Cul-762 - "Power Vent for Restaurant Exhaust Appliances"
Hinged Curb Cap Mounted with Cables
Curb Seal

Electrical Controls:
Model XFCC-1 - Pre-wired magnetic starter panel - Control is shipped loose for remote mounting. Unit controls - one (1) Exhaust Fan and one (1) Supply Fan. Control automatically starts fans when cooking occurs in compliance with IMC codes. Two (2) Temperature Interlock Sensors installed in collars.

One (1) Switch Mounting Location - On Control Package with one (1) - 2 Position Light Switch, one (1) - 2 Position Fan Switch, one (1) Position (Heat) Thermal Switch Turn on Exhaust in Fire Mode.
Thermal Overloads in Cabinet - UL Listed

Fire Suppression System: - Ansul R-102 - 6 gallon appliance specific fire system
Wall Mounted - All required system parts included .

Note: This is for reference only and is based on standard medium and heavy duty cooking equipment such as Ranges, Fryers, Charbroilers, and Ovens.

Pre-piped hood with detection - Factory Coordinated Install - Mechanical Shutoff Valve, 2.0" (Ansul) - One (1) Portable Kitchen Fire Extinguisher - Metal Blow Off Caps - One 910 Audible/Visual Horn Strobe - Permits and Puff (air) test included

Heated Supply Air Unit - MUA:
Model XDGK-112-H15-01 - 3,200 CFM at 0.5 in wc - Total SP of 1.229 in wc - 1.43 hp - 967 RPM - Elevation of 650 Ft.
Gas Type: Natural
Input @ Design 311.8 MBH - Output @ Design 286.8 MBH - Max LAT @ Design 80.0 F - Max Delta @ Design 83.0 F
Heating - Direct Gas
Airflow - Outdoor Air Only
Weatherhood - Aluminum Mesh

Electrical: 1-1/2 hp, 208-230 3-ph, 6.6 Amps
Supply MCA (minimum circuit amps): 8.7 Amps
Supply MOP (maximum operating amps): 15.0 Amps

Unit Accessories:
Discharge position - Downblast
Damper Control - Powered
Access Side - Right Side
Coatings - Galvanized
Mounting Option - GPI-29.00/29.00-G16
Blower Isolation - Neoprene
Insulation - Foil-Faced

Gas Accessories:
Ignition Control - Direct Spark
Temp Control - Discharge
Flame Sensing - Flame Rod
Agency Approval ETL/IRI
FM Approved - Yes
Unit Rated Gas Pressure - 1/2 PSI

Electrical Accessories:
Supply Fan - 1-1/2 HP
Motor RPM 1725
Efficiency - Standard
Enclosure - ODP (outdoor drip pan)
V/C/P - 208-230 3ph
Control Center - Yes
Inlet Air Sensor - Yes

Exhaust Duct:
Two (2) each at 10" x 19" Hood Connections "Pantleg to one (1) 18" x 19" x 120" overall length - Welded Steel Exhaust Duct for Type One (1) Application. Includes Integral Roof Curb Top Plate and two (2) clean-outs.
Vent Tech 16'HOOD EXHAUST-H - 16 Foot Commercial Exhaust Hood System
Zesco Products, Inc. BBB Business Review
Leasing Available
Instant SSL Certificate Secure Site
Instant SSL Certificate Secured